salt.states.netacl

Network ACL

Manage the firewall configuration on the network device managed through NAPALM. The firewall configuration is generated by Capirca.

New in version 2017.7.0.

codeauthor

Mircea Ulinic <ping@mirceaulinic.net>

maturity

new

depends

capirca, napalm

platform

unix

Dependencies

Capirca

To install Capirca, execute: pip install capirca.

NAPALM

To be able to load configuration on network devices, it requires NAPALM library to be installed: pip install napalm. Please check Installation for complete details.

salt.states.netacl.filter(name, filter_name, filter_options=None, terms=None, prepend=True, pillar_key='acl', pillarenv=None, saltenv=None, merge_pillar=False, only_lower_merge=False, revision_id=None, revision_no=None, revision_date=True, revision_date_format='%Y/%m/%d', test=False, commit=True, debug=False)

Generate and load the configuration of a policy filter.

filter_name

The name of the policy filter.

filter_options

Additional filter options. These options are platform-specific. See the complete list of options.

terms

Dictionary of terms for this policy filter. If not specified or empty, will try to load the configuration from the pillar, unless merge_pillar is set as False.

prepend: True

When merge_pillar is set as True, the final list of terms generated by merging the terms from terms with those defined in the pillar (if any): new terms are prepended at the beginning, while existing ones will preserve the position. To add the new terms at the end of the list, set this argument to False.

pillar_key: acl

The key in the pillar containing the default attributes values. Default: acl.

pillarenv

Query the master to generate fresh pillar data on the fly, specifically from the requested pillar environment.

saltenv

Included only for compatibility with pillarenv_from_saltenv, and is otherwise ignored.

merge_pillar: False

Merge terms with the corresponding value from the pillar. Default: False.

Note

By default this state does not merge, to avoid any unexpected behaviours.

The merge logic depends on the prepend argument.

The terms specified through the terms argument have higher priority than the pillar.

only_lower_merge: False

Specify if it should merge only the terms fields. Otherwise it will try to merge also filters fields. Default: False. This option requires merge_pillar, otherwise it is ignored.

revision_id

Add a comment in the filter config having the description for the changes applied.

revision_no

The revision count.

revision_date: True

Boolean flag: display the date when the filter configuration was generated. Default: True.

revision_date_format: %Y/%m/%d

The date format to be used when generating the perforce data. Default: %Y/%m/%d (<year>/<month>/<day>).

test: False

Dry run? If set as True, will apply the config, discard and return the changes. Default: False and will commit the changes on the device.

commit: True

Commit? Default: True.

debug: False

Debug mode. Will insert a new key under the output dictionary, as loaded_config containing the raw configuration loaded on the device.

CLI Example:

salt 'edge01.flw01' state.sls router.acl test=True

Output Example:

edge01.flw01:
----------
          ID: my-filter
    Function: netacl.filter
      Result: None
     Comment: Testing mode: Configuration discarded.
     Started: 12:24:40.598232
    Duration: 2437.139 ms
     Changes:
              ----------
              diff:
                  ---
                  +++
                  @@ -1228,9 +1228,24 @@
                  !
                  +ipv4 access-list my-filter
                  + 10 remark $Id: my-filter_state $
                  + 20 remark $Revision: 5 $
                  + 30 remark my-other-term
                  + 40 permit tcp any range 5678 5680 any
                  +!
                  +!
              loaded:
                  ! $Id: my-filter_state $
                  ! $Revision: 5 $
                  no ipv6 access-list my-filter
                  ipv6 access-list my-filter
                   remark $Id: my-filter_state $
                   remark $Revision: 5 $
                   remark my-other-term
                   permit tcp any range 5678 5680 any
                  exit

Summary for edge01.flw01
------------
Succeeded: 1 (unchanged=1, changed=1)
Failed:    0
------------
Total states run:     1
Total run time:   2.437 s

Pillar example:

acl:
  - my-filter:
      options:
        - inet6
      terms:
        - my-term:
            source_port: [1234, 1235]
            protocol:
              - tcp
              - udp
            source_address: 1.2.3.4
            action: reject
        - my-other-term:
            source_port:
              - [5678, 5680]
            protocol: tcp
            action: accept

State SLS Example:

{%- set filter_name = 'my-filter' -%}
{%- set my_filter_cfg = salt.netacl.get_filter_pillar(filter_name, pillar_key='firewall') -%}
my_first_filter_state:
  netacl.filter:
    - filter_name: {{ filter_name }}
    - options: {{ my_filter_cfg['options'] | json }}
    - terms: {{ my_filter_cfg['terms'] | json }}
    - revision_date: false
    - revision_no: 5
    - debug: true

Or:

my_first_filter_state:
  netacl.filter:
    - filter_name: my-filter
    - merge_pillar: true
    - pillar_key: firewall
    - revision_date: false
    - revision_no: 5
    - debug: true

In the example above, as inet6 has been specified in the filter_options, the configuration chunk referring to my-term has been ignored as it referred to IPv4 only (from source_address field).

Note

The first method allows the user to eventually apply complex manipulation and / or retrieve the data from external services before passing the data to the state. The second one is more straightforward, for less complex cases when loading the data directly from the pillar is sufficient.

Note

When passing retrieved pillar data into the state file, it is strongly recommended to use the json serializer explicitly (`` | json``), instead of relying on the default Python serializer.

salt.states.netacl.managed(name, filters=None, prepend=True, pillar_key='acl', pillarenv=None, saltenv=None, merge_pillar=False, only_lower_merge=False, revision_id=None, revision_no=None, revision_date=True, revision_date_format='%Y/%m/%d', test=False, commit=True, debug=False)

Manage the whole firewall configuration.

filters

Dictionary of filters for this policy. If not specified or empty, will try to load the configuration from the pillar, unless merge_pillar is set as False.

prepend: True

When merge_pillar is set as True, the final list of filters generated by merging the filters from filters with those defined in the pillar (if any): new filters are prepended at the beginning, while existing ones will preserve the position. To add the new filters at the end of the list, set this argument to False.

pillar_key: acl

The key in the pillar containing the default attributes values. Default: acl.

pillarenv

Query the master to generate fresh pillar data on the fly, specifically from the requested pillar environment.

saltenv

Included only for compatibility with pillarenv_from_saltenv, and is otherwise ignored.

merge_pillar: False

Merge the filters will the corresponding values from the pillar. Default: False.

Note

By default this state does not merge, to avoid any unexpected behaviours.

The merge logic depends on the prepend argument.

The filters specified through the filters argument have higher priority than the pillar.

only_lower_merge: False

Specify if it should merge only the filters and terms fields. Otherwise it will try to merge everything at the policy level. Default: False. This option requires merge_pillar, otherwise it is ignored.

test: False

Dry run? If set as True, will apply the config, discard and return the changes. Default: False and will commit the changes on the device.

revision_id

Add a comment in the policy config having the description for the changes applied.

revision_no

The revision count.

revision_date: True

Boolean flag: display the date when the policy configuration was generated. Default: True.

revision_date_format: %Y/%m/%d

The date format to be used when generating the perforce data. Default: %Y/%m/%d (<year>/<month>/<day>).

commit: True

Commit? Default: True.

debug: False

Debug mode. Will insert a new key under the output dictionary, as loaded_config containing the raw configuration loaded on the device.

CLI Example:

salt 'edge01.bjm01' state.sls router.acl test=True

Output Example:

edge01.bjm01:
-------------
              ID: netacl_example
        Function: netacl.managed
          Result: None
         Comment: Testing mode: Configuration discarded.
         Started: 12:03:24.807023
        Duration: 5569.453 ms
         Changes:
                  ----------
                  diff:
                      [edit firewall]
                      +    family inet {
                      +        /*
                      +         ** $Id: netacl_example $
                      +         ** $Date: 2017/07/03 $
                      +         ** $Revision: 2 $
                      +         **
                      +         */
                      +        filter my-filter {
                      +            interface-specific;
                      +            term my-term {
                      +                from {
                      +                    source-address {
                      +                        1.2.3.4/32;
                      +                    }
                      +                    protocol [ tcp udp ];
                      +                    source-port [ 1234 1235 ];
                      +                }
                      +                then {
                      +                    reject;
                      +                }
                      +            }
                      +            term my-other-term {
                      +                from {
                      +                    protocol tcp;
                      +                    source-port 5678-5680;
                      +                }
                      +                then accept;
                      +            }
                      +        }
                      +        /*
                      +         ** $Id: netacl_example $
                      +         ** $Date: 2017/07/03 $
                      +         ** $Revision: 2 $
                      +         **
                      +         */
                      +        filter block-icmp {
                      +            interface-specific;
                      +            term first-term {
                      +                from {
                      +                    protocol icmp;
                      +                }
                      +                then {
                      +                    reject;
                      +                }
                      +            }
                      +        }
                      +    }
                  loaded:
                      firewall {
                          family inet {
                              replace:
                              /*
                              ** $Id: netacl_example $
                              ** $Date: 2017/07/03 $
                              ** $Revision: 2 $
                              **
                              */
                              filter my-filter {
                                  interface-specific;
                                  term my-term {
                                      from {
                                          source-address {
                                              1.2.3.4/32;
                                          }
                                          protocol [ tcp udp ];
                                          source-port [ 1234 1235 ];
                                      }
                                      then {
                                          reject;
                                      }
                                  }
                                  term my-other-term {
                                      from {
                                          protocol tcp;
                                          source-port 5678-5680;
                                      }
                                      then accept;
                                  }
                              }
                          }
                      }
                      firewall {
                          family inet {
                              replace:
                              /*
                              ** $Id: netacl_example $
                              ** $Date: 2017/07/03 $
                              ** $Revision: 2 $
                              **
                              */
                              filter block-icmp {
                                  interface-specific;
                                  term first-term {
                                      from {
                                          protocol icmp;
                                      }
                                      then {
                                          reject;
                                      }
                                  }
                              }
                          }
                      }

    Summary for edge01.bjm01
    ------------
    Succeeded: 1 (unchanged=1, changed=1)
    Failed:    0
    ------------
    Total states run:     1
    Total run time:   5.569 s

The policy configuration has been loaded from the pillar, having the following structure:

firewall:
  - my-filter:
      terms:
        - my-term:
            source_port: [1234, 1235]
            protocol:
              - tcp
              - udp
            source_address: 1.2.3.4
            action: reject
        - my-other-term:
            source_port:
              - [5678, 5680]
            protocol: tcp
            action: accept
  - block-icmp:
      terms:
        - first-term:
            protocol:
              - icmp
            action: reject

Example SLS file:

{%- set fw_filters = pillar.get('firewall', {}) -%}
netacl_example:
  netacl.managed:
    - filters: {{ fw_filters | json }}
    - revision_no: 2
    - debug: true

Or:

netacl_example:
  netacl.managed:
    - pillar_key: firewall
    - merge_pillar: true
    - revision_no: 2
    - debug: true

Note

The first method allows the user to eventually apply complex manipulation and / or retrieve the data from external services before passing the data to the state. The second one is more straightforward, for less complex cases when loading the data directly from the pillar is sufficient.

Note

When passing retrieved pillar data into the state file, it is strongly recommended to use the json serializer explicitly (`` | json``), instead of relying on the default Python serializer.

salt.states.netacl.term(name, filter_name, term_name, filter_options=None, pillar_key='acl', pillarenv=None, saltenv=None, merge_pillar=False, revision_id=None, revision_no=None, revision_date=True, revision_date_format='%Y/%m/%d', test=False, commit=True, debug=False, source_service=None, destination_service=None, **term_fields)

Manage the configuration of a specific policy term.

filter_name

The name of the policy filter.

term_name

The name of the term.

filter_options

Additional filter options. These options are platform-specific. See the complete list of options.

pillar_key: acl

The key in the pillar containing the default attributes values. Default: acl.

pillarenv

Query the master to generate fresh pillar data on the fly, specifically from the requested pillar environment.

saltenv

Included only for compatibility with pillarenv_from_saltenv, and is otherwise ignored.

merge_pillar: False

Merge the CLI variables with the pillar. Default: False.

The properties specified through the state arguments have higher priority than the pillar.

revision_id

Add a comment in the term config having the description for the changes applied.

revision_no

The revision count.

revision_date: True

Boolean flag: display the date when the term configuration was generated. Default: True.

revision_date_format: %Y/%m/%d

The date format to be used when generating the perforce data. Default: %Y/%m/%d (<year>/<month>/<day>).

test: False

Dry run? If set as True, will apply the config, discard and return the changes. Default: False and will commit the changes on the device.

commit: True

Commit? Default: True.

debug: False

Debug mode. Will insert a new key under the output dictionary, as loaded_config containing the raw configuration loaded on the device.

source_service

A special service to choose from. This is a helper so the user is able to select a source just using the name, instead of specifying a source_port and protocol.

As this module is available on Unix platforms only, it reads the IANA port assignment from /etc/services.

If the user requires additional shortcuts to be referenced, they can add entries under /etc/services, which can be managed using the file state.

destination_service

A special service to choose from. This is a helper so the user is able to select a source just using the name, instead of specifying a destination_port and protocol. Allows the same options as source_service.

term_fields

Term attributes. To see what fields are supported, please consult the list of supported keywords. Some platforms have few other optional keywords.

Note

The following fields are accepted:

  • action

  • address

  • address_exclude

  • comment

  • counter

  • expiration

  • destination_address

  • destination_address_exclude

  • destination_port

  • destination_prefix

  • forwarding_class

  • forwarding_class_except

  • logging

  • log_name

  • loss_priority

  • option

  • policer

  • port

  • precedence

  • principals

  • protocol

  • protocol_except

  • qos

  • pan_application

  • routing_instance

  • source_address

  • source_address_exclude

  • source_port

  • source_prefix

  • verbatim

  • packet_length

  • fragment_offset

  • hop_limit

  • icmp_type

  • ether_type

  • traffic_class_count

  • traffic_type

  • translated

  • dscp_set

  • dscp_match

  • dscp_except

  • next_ip

  • flexible_match_range

  • source_prefix_except

  • destination_prefix_except

  • vpn

  • source_tag

  • destination_tag

  • source_interface

  • destination_interface

  • flattened

  • flattened_addr

  • flattened_saddr

  • flattened_daddr

  • priority

Note

The following fields can be also a single value and a list of values:

  • action

  • address

  • address_exclude

  • comment

  • destination_address

  • destination_address_exclude

  • destination_port

  • destination_prefix

  • forwarding_class

  • forwarding_class_except

  • logging

  • option

  • port

  • precedence

  • principals

  • protocol

  • protocol_except

  • pan_application

  • source_address

  • source_address_exclude

  • source_port

  • source_prefix

  • verbatim

  • icmp_type

  • ether_type

  • traffic_type

  • dscp_match

  • dscp_except

  • flexible_match_range

  • source_prefix_except

  • destination_prefix_except

  • source_tag

  • destination_tag

  • source_service

  • destination_service

Example: destination_address can be either defined as:

destination_address: 172.17.17.1/24

or as a list of destination IP addresses:

destination_address:
    - 172.17.17.1/24
    - 172.17.19.1/24

or a list of services to be matched:

source_service:
    - ntp
    - snmp
    - ldap
    - bgpd

Note

The port fields source_port and destination_port can be used as above to select either a single value, either a list of values, but also they can select port ranges. Example:

source_port:
    - [1000, 2000]
    - [3000, 4000]

With the configuration above, the user is able to select the 1000-2000 and 3000-4000 source port ranges.

CLI Example:

salt 'edge01.bjm01' state.sls router.acl

Output Example:

edge01.bjm01:
----------
          ID: update_icmp_first_term
    Function: netacl.term
      Result: None
     Comment: Testing mode: Configuration discarded.
     Started: 12:49:09.174179
    Duration: 5751.882 ms
     Changes:
              ----------
              diff:
                  [edit firewall]
                  +    family inet {
                  +        /*
                  +         ** $Id: update_icmp_first_term $
                  +         ** $Date: 2017/02/30 $
                  +         **
                  +         */
                  +        filter block-icmp {
                  +            term first-term {
                  +                from {
                  +                    protocol icmp;
                  +                }
                  +                then {
                  +                    reject;
                  +                }
                  +            }
                  +        }
                  +    }

Summary for edge01.bjm01
------------
Succeeded: 1 (unchanged=1, changed=1)
Failed:    0
------------
Total states run:     1
Total run time:   5.752 s

Pillar example:

firewall:
  - block-icmp:
      terms:
        - first-term:
            protocol:
              - icmp
            action: reject

State SLS example:

{%- set filter_name = 'block-icmp' -%}
{%- set term_name = 'first-term' -%}
{%- set my_term_cfg = salt.netacl.get_term_pillar(filter_name, term_name) -%}

update_icmp_first_term:
  netacl.term:
    - filter_name: {{ filter_name }}
    - filter_options:
        - not-interface-specific
    - term_name: {{ term_name }}
    - {{ my_term_cfg | json }}

Or directly referencing the pillar keys:

update_icmp_first_term:
  netacl.term:
    - filter_name: block-icmp
    - filter_options:
        - not-interface-specific
    - term_name: first-term
    - merge_pillar: true

Note

The first method allows the user to eventually apply complex manipulation and / or retrieve the data from external services before passing the data to the state. The second one is more straightforward, for less complex cases when loading the data directly from the pillar is sufficient.

Note

When passing retrieved pillar data into the state file, it is strongly recommended to use the json serializer explicitly (`` | json``), instead of relying on the default Python serializer.