Salt 2017.7.0 Release Notes - Codename Nitrogen

Python 3

The 2017.7 Salt Release adds initial Python 3 support.

The default Python version of Salt will remain Python 2, although Python 3 packages will be supplied for users who want to help test this new feature.

Python 2.6 Deprecation

Salt will no longer support Python 2.6. We will provide python2.7 packages on our repo for RedHat and CentOS 6 to ensure users can still run Salt on these platforms.

As this will impact the installation of additional dependencies for salt modules please use pip packages if there is not a package available in a repository. You will need to install the python27-pip package to get access to the correct pip27 executable: yum install python27-pip

Known Issues

The following salt-cloud drivers have known issues running with Python 3. These drivers will not work with Python 3, and Python 2.7 should be used instead:

  • Joyent

  • When running under Python 3, users who require Unicode support should ensure that a locale is set on their machines. Users using the C locale are advised to switch to a UTF-aware locale to ensure proper functionality with Salt with Python 3.

Remember to update the Salt Master first

Salt's policy has always been that when upgrading, the minion should never be on a newer version than the master. Specifically with this update, because of changes in the fileclient, the 2017.7 minion requires a 2017.7 master.

Backwards compatibility is still maintained, so older minions can still be used.

More information can be found in the Salt FAQ

States Added for Management of systemd Unit Masking

The service.masked and service.umasked states have been added to allow Salt to manage masking of systemd units.

Additionally, the following functions in the systemd execution module have changed to accommodate the fact that indefinite and runtime masks can co-exist for the same unit:

  • service.masked - The return from this function has changed from previous releases. Before, False would be returned if the unit was not masked, and the output of systemctl is-enabled <unit name> would be returned if the unit was masked. However, since indefinite and runtime masks can exist for the same unit at the same time, this function has been altered to accept a runtime argument. If True, the minion will be checked for a runtime mask assigned to the named unit. If False, then the minion will be checked for an indefinite mask. If one is found, True will be returned. If not, then False will be returned.

  • service.masked - This function used to just run systemctl is-enabled <unit name> and based on the return from this function the corresponding mask type would be removed. However, if both runtime and indefinite masks are set for the same unit, then systemctl is-enabled <unit name> would show just the indefinite mask. The indefinite mask would be removed, but the runtime mask would remain. The function has been modified to accept a runtime argument, and will attempt to remove a runtime mask if that argument is set to True. If set to False, it will attempt to remove an indefinite mask.

These new runtime arguments default to False.

Pillar Encryption

Beginning in 2016.3.0 the CLI pillar data passed to several functions could conditionally be passed through a renderer to be decrypted. This functionality has now been extended to pillar SLS files as well. See here for detailed documentation on this feature.

Grains Changes

  • The osmajorrelease grain has been changed from a string to an integer. State files, especially those using a templating language like Jinja, may need to be adjusted to account for this change.

  • Add ability to specify disk backing mode in the VMWare salt cloud profile.

State Module Changes

  • The service.running and service.dead states now support a no_block argument which, when set to True on systemd minions, will start/stop the service using the --no-block flag in the systemctl command. On non-systemd minions, a warning will be issued.

  • The module.run state has dropped its previous syntax with m_ prefix for reserved keywords. Additionally, it allows running several functions in a batch.

    Note

    It is necessary to explicitly turn on the new behavior (see below)

    # Before
    run_something:
      module.run:
        - name: mymodule.something
        - m_name: 'some name'
        - kwargs: {
          first_arg: 'one',
          second_arg: 'two',
          do_stuff: 'True'
        }
    
    # After
    run_something:
      module.run:
        - mymodule.something:
          - name: some name
          - first_arg: one
          - second_arg: two
          - do_stuff: True
    

    Since a lot of users are already using module.run states, this new behavior must currently be explicitly turned on, to allow users to take their time updating their SLS files. However, please keep in mind that the new syntax will take effect in the next feature release of Salt (Oxygen) and the old usage will no longer be supported at that time.

    Another feature of the new module.run is that it allows calling many functions in a single batch, such as:

    run_something:
      module.run:
        - mymodule.function_without_parameters:
        - mymodule.another_function:
          - myparam
          - my_other_param
    

    In a rare case that you have a function that needs to be called several times but with the different parameters, an additional feature of "tagging" is to the rescue. In order to tag a function, use a colon delimiter. For example:

    run_something:
      module.run:
        - mymodule.same_function:1:
        - mymodule.same_function:2:
          - myparam
          - my_other_param
        - mymodule.same_function:3:
          - foo: bar
    

    The example above will run mymodule.same_function three times with the different parameters.

    To enable the new behavior for module.run, add the following to the minion config file:

    use_superseded:
      - module.run
    
  • The default for the fingerprint_hash_type option used in the present function in the ssh state changed from md5 to sha256.

Execution Module Changes

  • Several functions in the systemd execution module have gained a no_block argument, which when set to True will use --no-block in the systemctl command.

  • In the solarisips pkg module, the default value for the refresh argument to the list_upgrades function has been changed from False to True. This makes the function more consistent with all of the other pkg modules (The other pkg.list_upgrades functions all defaulted to True).

  • The functions which handle masking in the systemd module have changed. These changes are described above alongside the information on the new states which have been added to manage masking of systemd units.

  • The pkg.list_repo_pkgs function for yum/dnf-based distros has had its default output format changed. In prior releases, results would be organized by repository. Now, the default for each package will be a simple list of versions. To get the old behavior, pass byrepo=True to the function.

  • A pkg.list_repo_pkgs function has been added for both Debian/Ubuntu and Arch Linux-based distros.

  • The system module changed its return format from "HH:MM AM/PM" to "HH:MM:SS AM/PM" for get_system_time.

  • The default for the fingerprint_hash_type option used in the ssh execution module changed from md5 to sha256.

Proxy Module Changes

The proxy_merge_grains_in_module configuration variable introduced in 2016.3, has been changed, defaulting to True.

The connection with the remote device is kept alive by default, when the module implements the alive function and proxy_keep_alive is set to True. The polling interval is set using the proxy_keep_alive_interval option which defaults to 1 minute.

The developers are also able to use the proxy_always_alive, when designing a proxy module flexible enough to open the connection with the remote device only when required.

Wildcard Versions in pkg.installed States

  • The pkg.installed state now supports wildcards in package versions, for the following platforms:

    • SUSE/openSUSE Leap/Thumbleweed

    • Debian/Ubuntu

    • RHEL/CentOS

    • Arch Linux

    This support also extends to any derivatives of these distros, which use the aptpkg, yumpkg, or pacman providers for the pkg virtual module.

    Using wildcards can be useful for packages where the release name is built into the version in some way, such as for RHEL/CentOS which typically has version numbers like 1.2.34-5.el7. An example of the usage for this would be:

    mypkg:
      pkg.installed:
        - version: '1.2.34*'
    

Master Configuration Additions

  • syndic_forward_all_events - Option on multi-syndic or single when connected to multiple masters to be able to send events to all connected masters.

  • eauth_acl_module - In case external auth is enabled master can get authenticate and get the authorization list from different auth modules.

  • keep_acl_in_token - Option that allows master to build ACL once for each user being authenticated and keep it in the token.

Minion Configuration Additions

  • pillarenv_from_saltenv - When set to True (default is False), the pillarenv option will take the same value as the effective saltenv when running states. This would allow a user to run salt '*' state.apply mysls saltenv=dev, and the SLS for both the state and pillar data would be sourced from the dev environment, essentially the equivalent of running salt '*' state.apply mysls saltenv=dev pillarenv=dev. Note that if pillarenv is set in the minion config file, or if pillarenv is provided on the CLI, it will override this option.

salt-api Changes

The rest_cherrypy netapi module has received a few minor improvements:

  • A CORS bugfix.

  • A new /token convenience endpoint to generate Salt eauth tokens.

  • A proof-of-concept JavaScript single-page application intended to demonstrate how to use the Server-Sent Events stream in an application. It is available in a default install by visiting the /app URL in a browser.

Python API Changes

expr_form Deprecation

The LocalClient's expr_form argument has been deprecated and renamed to tgt_type. This change was made due to numerous reports of confusion among community members, since the targeting method is published to minions as tgt_type, and appears as tgt_type in the job cache as well.

While expr_form will continue to be supported until the 2019.2.0 release cycle (two major releases after this one), those who are using the LocalClient (either directly, or implictly via a netapi module) are encouraged to update their code to use tgt_type.

full_return Argument in LocalClient and RunnerClient

An full_return argument has been added to the cmd and cmd_sync methods in LocalClient and RunnerClient which causes the return data structure to include job meta data such as retcode.

This is useful at the Python API:

>>> import salt.client
>>> client = salt.client.LocalClient()
>>> client.cmd('*', 'cmd.run', ['return 1'], full_return=True)
{'jerry': {'jid': '20170520151213898053', 'ret': '', 'retcode': 1}}

As well as from salt-api:

% curl -b /tmp/cookies.txt -sS http://localhost:8000 \
    -H 'Content-type: application/json' \
    -d '[{
        "client": "local",
        "tgt": "*",
        "fun": "cmd.run",
        "arg": ["return 1"],
        "full_return": true
    }]'

{"return": [{"jerry": {"jid": "20170520151531477653", "retcode": 1, "ret": ""}}]}

Network Automation

NAPALM

Introduced in 2016.11, the modules for cross-vendor network automation have been improved, enhanced and widenened in scope:

  • Manage network devices like servers: the NAPALM modules have been transformed so they can run in both proxy and regular minions. That means, if the operating system allows, the salt-minion package can be installed directly on the network gear. Examples of such devices (also covered by NAPALM) include: Arista, Cumulus, Cisco IOS-XR or Cisco Nexus.

  • Not always alive: in certain less dynamic environments, maintaining the remote connection permanently open with the network device is not always beneficial. In those particular cases, the user can select to initialize the connection only when needed, by specifying the field always_alive: false in the proxy configuration or using the proxy_always_alive option.

  • Proxy keepalive: due to external factors, the connection with the remote device can be dropped, e.g.: packet loss, idle time (no commands issued within a couple of minutes or seconds), or simply the device decides to kill the process. In 2017.7.0 we have introduced the functionality to re-establish the connection. One can disable this feature through the proxy_keep_alive option and adjust the polling frequency speciying a custom value for proxy_keep_alive_interval, in minutes.

New modules:

  • Netconfig state module - Manage the configuration of network devices using arbitrary templates and the Salt-specific advanced templating methodologies.

  • Network ACL execution module - Generate and load ACL (firewall) configuration on network devices.

  • Network ACL state - Manage the firewall configuration. It only requires writing the pillar structure correctly!

  • NAPALM YANG execution module - Parse, generate and load native device configuration in a standard way, using the OpenConfig/IETF models. This module contains also helpers for the states.

  • NAPALM YANG state module - Manage the network device configuration according to the YANG models (OpenConfig or IETF).

  • NET finder - Runner to find details easily and fast. It's smart enough to know what you are looking for. It will search in the details of the network interfaces, IP addresses, MAC address tables, ARP tables and LLDP neighbors.

  • BGP finder - Runner to search BGP neighbors details.

  • NAPALM syslog - Engine to import events from the napalm-logs library into the Salt event bus. The events are based on the syslog messages from the network devices and structured following the OpenConfig/IETF YANG models.

  • NAPALM Helpers - Generic helpers for NAPALM-related operations. For example, the Compliance report function can be used inside the state modules to compare the expected and the existing configuration.

New functions:

  • Configuration getter - Return the whole configuration of the network device.

  • Optics getter - Fetches the power usage on the various transceivers installed on the network device (in dBm).

New grains: Host, Host DNS, Username and Optional args.

Custom Refspecs in GitFS / git_pillar / winrepo

It is now possible to specify the refspecs to use when fetching from remote repositories for GitFS, git_pillar, and winrepo. More information on how this feature works can be found here in the GitFS Walkthrough. The git_pillar and winrepo versions of this feature work the same as their GitFS counterpart.

git_pillar "mountpoints" Feature Added

See here for detailed documentation.

Big Improvements to Docker Support

The old docker state and execution modules have been moved to salt-contrib. The dockerng execution module has been renamed to docker and now serves as Salt's official Docker execution module.

The old dockerng state module has been split into 4 state modules:

The reason for this change was to make states and requisites more clear. For example, imagine this SLS:

myuser/appimage:
  docker.image_present:
    - sls: docker.images.appimage

myapp:
  docker.running:
    - image: myuser/appimage
    - require:
      - docker: myuser/appimage

The new syntax would be:

myuser/appimage:
  docker_image.present:
    - sls: docker.images.appimage

myapp:
  docker_container.running:
    - image: myuser/appimage
    - require:
      - docker_image: myuser/appimage

This is similar to how Salt handles MySQL, MongoDB, Zabbix, and other cases where the same execution module is used to manage several different kinds of objects (users, databases, roles, etc.).

Note

With the Moby announcement coming at this year's DockerCon, Salt's docker execution module (as well as the state modules) work interchangeably when docker is replaced with moby (e.g. moby_container.running, moby_image.present, moby.inspect_container, etc.)

The old syntax will continue to work until the 2019.2.0 release of Salt. The old dockerng naming will also continue to work until that release, so no immediate changes need to be made to your SLS files (unless you were still using the old docker states that have been moved to salt-contrib).

The docker_container.running state has undergone a significant change in how it determines whether or not a container needs to be replaced. Rather than comparing individual arguments to their corresponding values in the named container, a temporary container is created (but not started) using the passed arguments. The two containers are then compared to each other to determine whether or not there are changes, and if so, the old container is stopped and destroyed, and the temporary container is renamed and started.

Salt still needs to translate arguments into the format which docker-py expects, but if it does not properly do so, the skip_translate argument can be used to skip input translation on an argument-by-argument basis, and you can then format your SLS file to pass the data in the format that the docker-py expects. This allows you to work around any changes in Docker's API or issues with the input translation, and continue to manage your Docker containers using Salt. Read the documentation for skip_translate for more information.

Note

When running the docker_container.running state for the first time after upgrading to 2017.7.0, your container(s) may be replaced. The changes may show diffs for certain parameters which say that the old value was an empty string, and the new value is None. This is due to the fact that in prior releases Salt was passing empty strings for these values when creating the container if they were undefined in the SLS file, where now Salt simply does not pass any arguments not explicitly defined in the SLS file. Subsequent runs of the state should not replace the container if the configuration remains unchanged.

New SSH Cache Roster

The SSH cache Roster has been rewritten from scratch to increase its usefulness. The new roster supports all minion matchers, so it is now possible to target minions identically through salt and salt-ssh.

Using the new roster_order configuration syntax it's now possible to compose a roster out of any combination of grains, pillar and mine data and even Salt SDB URLs. The new release is also fully IPv4 and IPv6 enabled and even has support for CIDR ranges.

Salt-SSH Default Options

Defaults for rosters can now be set, so that they don't have to be set on every entry in a roster or specified from the commandline.

The new option is roster_defaults and is specified in the master config file:

roster_defaults:
  user: daniel
  sudo: True
  priv: /root/.ssh/id_rsa
  tty: True

Blacklist or Whitelist Extmod Sync

The modules that are synced to minions can now be limited.

The following configuration options have been added for the master:

and for the minion:

Additional Features

  • The mine.update function has a new optional argument mine_functions that can be used to refresh mine functions at a more specific interval than scheduled using the mine_interval option. However, this argument can be used by explicit schedule. For example, if we need the mines for net.lldp to be refreshed every 12 hours:

    schedule:
      lldp_mine_update:
        function: mine.update
        kwargs:
          mine_functions:
            net.lldp: []
        hours: 12
    
  • The salt runner has a new function: salt.execute. It is mainly a shortcut to facilitate the execution of various functions from other runners, e.g.:

    ret1 = __salt__["salt.execute"]("*", "mod.fun")
    

New Modules

Deprecations

General Deprecations

  • Removed support for aliasing cmd.run to cmd.shell.

  • Removed support for Dulwich from GitFS.

  • Beacon configurations should be lists instead of dictionaries.

  • The PidfileMixin has been removed. Please use DaemonMixIn instead.

  • The use_pending argument was removed from the salt.utils.event.get_event function.

  • The pending_tags argument was removed from the salt.utils.event.get_event function.

Configuration Option Deprecations

  • The client_acl configuration option has been removed. Please use publisher_acl instead.

  • The client_acl_blacklist configuration option has been removed. Please use publisher_acl_blacklist instead.

  • The win_gitrepos configuration option has been removed. Please use the winrepo_remotes option instead.

  • The win_repo configuration option has been removed. Please use winrepo_dir instead.

  • The win_repo_mastercachefile configuration option has been removed. Please use the winrepo_cachefile option instead.

Module Deprecations

The git execution module had the following changes:

  • The fmt argument was removed from the archive function. Please use format instead.

  • The repository argument was removed from the clone function. Please use url instead.

  • The is_global argument was removed from the config_set function. Please use global instead.

  • The branch argument was removed from the merge function. Please use rev instead.

  • The branch argument was removed from the push function. Please use rev instead.

The glusterfs execution module had the following functions removed:

  • create: Please use create_volume instead.

  • delete: Please use delete_volume instead.

  • list_peers: Please use peer_status instead.

The htpasswd execution module had the following function removed:

  • useradd_all: Please use useradd instead.

The img execution module has been removed. All of its associated functions were marked for removal in the 2017.7.0 release. The functions removed in this module are mapped as follows:

  • mount_image/mnt_image: Please use mount.mount instead.

  • umount_image: Please use mount.umount instead.

  • bootstrap: Please use genesis.bootstrap instead.

The smartos_virt execution module had the following functions removed:

  • create: Please use start instead.

  • destroy Please use stop instead.

  • list_vms: Please use list_domains instead.

The virt execution module had the following functions removed:

  • create: Please use start instead.

  • destroy Please use stop instead.

  • list_vms: Please use list_domains instead.

The virtualenv_mod execution module had the following changes:

  • The package_or_requirement argument was removed from both the get_resource_path and the get_resource_content functions. Please use package instead.

  • The resource_name argument was removed from both the get_resource_path and get_resource_content functions. Please use resource instead.

The win_repo execution module had the following changes:

  • The win_repo_source_dir option was removed from the win_repo module. Please use winrepo_source_dir instead.

The xapi execution module had the following functions removed:

  • create: Please use start instead.

  • destroy: Please use stop instead.

  • list_vms: Please use list_domains instead.

The zypper execution module had the following function removed:

  • info: Please use info_available instead.

Pillar Deprecations

  • Support for the raw_data argument for the file_tree ext_pillar has been removed. Please use keep_newline instead.

  • SQLite3 database connection configuration previously had keys under pillar. This legacy compatibility has been removed.

Proxy Minion Deprecations

  • The proxy_merge_grains_in_module default has been switched from False to True.

Salt-API Deprecations

  • The SaltAPI.run() function has been removed. Please use the SaltAPI.start() function instead.

Salt-Cloud Deprecations

  • Support for using the keyword provider in salt-cloud provider config files has been removed. Please use driver instead. The provider keyword should now only be used in cloud profile config files.

Salt-SSH Deprecations

  • The wipe_ssh option for salt-ssh has been removed. Please use the ssh_wipe option instead.

State Deprecations

The apache_conf state had the following functions removed:

  • disable: Please use disabled instead.

  • enable: Please use enabled instead.

The apache_module state had the following functions removed:

  • disable: Please use disabled instead.

  • enable: Please use enabled instead.

The apache_site state had the following functions removed:

  • disable: Please use disabled instead.

  • enable: Please use enabled instead.

The chocolatey state had the following functions removed:

  • install: Please use installed instead.

  • uninstall: Please use uninstalled instead.

The git state had the following changes:

  • The config function was removed. Please use config_set instead.

  • The is_global option was removed from the config_set function. Please use global instead.

  • The always_fetch option was removed from the latest function, as it no longer has any effect. Please see the 2015.8.0 release notes for more information.

  • The force option was removed from the latest function. Please use force_clone instead.

  • The remote_name option was removed from the latest function. Please use remote instead.

The glusterfs state had the following function removed:

  • created: Please use volume_present instead.

The openvswitch_port state had the following change:

  • The type option was removed from the present function. Please use tunnel_type instead.

Build Notes

Windows Installer Packages

Windows Installer packages have been patched with the following PR: 42347